Santi Öky-setti

Kysy myös mittatilausvaihtoehtoa!  Mitta- ja erikoistilauspuvuissa toimitusaika n.6-8 vk.

Mittapukujen tilauksissa otathan etukäteen yhteyttä ja varaat ajan mittaukseen. Suosituksemme on, että virheiden välttämiseksi mitat otetaan liikkeessämme ammattitaitoisen henkilökuntamme toimesta. Varuste.net ei vastaa mittavirheistä, mikäli mitat ovat itse ilmoitetut.

Pyydämme sinua ottamaan mittaukseen mukaan kaikki aluspukeutumiseen liittyvän, jota aiot käyttää aluspuvun alla (esim erityinen kerrasto, lämpöliivit tms lämmityselementit). Santin aluspuvut ovat luonteeltaan tyköistuvia, joten kaikki normaalisti käyttämäsi lisäpukeutuminen on huomioitava mittojen otossa.

Huom! Räätälöidyillä puvuilla ei ole vaihto- eikä palautusoikeutta.

Santi is glad to introduce a new, innovative SANTI 303 Thermovalve, which is the transition between the external battery and the elements of the heating system located under the drysuit. It replaces the standard inlet valve, as unlike a connector, it has two functions at the same time, an inlet valve and an integrated connector.

The new Santi 303 Thermovalve has a rotating head, which is an innovative solution in thermovalve design technology. Its great advantage is placing the cable with the E / O connector in the down position, with the possibility of turning the head by 270 degrees, which allows for trouble-free connection of the battery cable both in the position of the connector to the right and left. Until now, when using a "standard" thermo-valve, whose rotation range is only 90 degrees, with its trouble-free use by backmount divers, used by sidemount divers, unfortunately, it is necessary to point the power cable upwards in order to allow the positioning of the valve spigot to the right side. The swivel range completely eliminates such situations, so the new thermovalve can be called an extremely universal design in its application.

• Rotating head (angle 270 °), equipped with a medium pressure connector
• 270 ° moveable valve head for more convenient hose attachment which allows for optimal E/O cord and pressure hose settlement under the drysuit
• Includes two electrical connectors on opposite sides of the cable - a connector for connecting with a battery adapted to work in water (E/O cord) and a waterproof connector for connecting a Heating System products from SANTI
• Works with power supply no higher than 12V
• Total length of the cables including plugs – about 55cm
• Includes a two-piece nut
• Available with „APEKS” or “SI-TECH” screw size

The Santi heated gloves are designed as a part of the complex heating system consisting of the gloves, thermo valve/connector and an external battery canister. This configuration allows a diver to wear the gloves under the dry gloves and use them in line with a heating vest or heated undersuit, without an additional valve/bulkhead, or dangers associated with internal batteries. The heated gloves can also be used as a stand alone system using cables provided.

• 36 W (pair)
• Run time: 10 Ah / about 3 hours and 20 minutes of heating, 20 Ah / about 6 hours and 40 minutes of heating
• Maximum heating temperature 45 °C
• Made of breathable fabric
• Keeps you warm even when the heating is off
• Evenly distributed heating wiring that allows for freedom of movements in palms
• Easy connection to Santi heated vest and undersuit
• CE certified

SANTI DIVING BATTERY 6Ah – Designed for the Santi heating system.

• Light, small and ergonomic container
• E / O cord connector with unique led illumination
• Trouble-free piezoelectric switch
• Belt loop (no need for clamps)
• Charging through E / O cord connector
• The possibility of using for both the Santi heating system and lights
• Modern design

Technical parameters of the battery

• Capacity: 6 Ah
• Operating voltage: 12 V
• Height: 115 mm
• Diameter: 74 mm
• E/O cord length: 60cm
• Material: polyacetal / POM / Delrin
• Charging time: 4-5 hours
• Operation depth: 100m
• Weight: 680g

Burning times:

This battery pack is manufactured with hi-tech rechargeable Li-Ion cells which offer high discharge current. As result, it may be used to supply power to equipment items which require 200W in total. On the top section of the canister there are an E/O cord connector, piezo switch, overpressure valve. There is also a belt loop (no need for clamps) on the side of the housing.

One touch is enough to turn battery on, which is indicated by built-in blue LED on the E/O cord connector. After each switch-on power status is presented. Number of flashes emitted by blue LED informs about the charge level.

• 3 flashes of LED stand for 60%-100%
• 2 flashes of LED stand for 30-60%
• 1 flash of LED stands for < 30%
• no light emitted by LED – fully discharged
• after power level check battery resumes standard mode, what is indicated by constant LED light.

Battery is designed to supply power to SANTI heated apparel (undersuit, vest, gloves). However it may be also used with Halcyon Primary Diving Lights.

• heated undersuit (110W): about 2h30min / 3h
• heated vest (55W): about 5h / 6h
• heated gloves (36W): about 9h / 10h
• undersuit + gloves (146W): about 2h / 2h15min
• vest + gloves (91W): about 3h15min / 3h45min
• Halcyon Focus/Flare light (24 hours)

Technical parameters:

• capacity: 24 Ah
• operating voltage: 11,1 V
• cells type: Li-Ion
• height: 270 mm
• diameter: 74 mm
• E / O cord length: 60cm
• housing material: polyacetal / POM / Delrin®
• charging time: ~14h
• max depth: 100m
• weight: 1,8kg

Charger parameters:

• supply voltage range: 100-265V AC 50-60Hz
• input current: 1,8A
• output voltage: 12,6VDC
• output current: 3A
• USB output: 5VDC 1A
• output power: 90W
• dimensions: 132mm x 58mm x 30mm
• weight: 365g