Lajit‪» Sukellus‪» Lämpöliivijärjestelmät‪» Tarvikkeet‪»

Santi 303 Thermovalve

Santi 303 Thermovalve

Santi 303 Thermovalve

Hinta
340,00 + toimituskulut
Sis. alv 24 %


Määrä
kpl



Koko
Sitech
Varastossa
Apeks
Varastossa



Valitse kaikki ominaisuudet.
Saatavuus
Heti

Varastotilanne ja saapuvat

Sijainti Myymälä (Helsinki): Sukellus, 25


Arvostelut
Yleisarvosana ()


Tuotteen kuvaus

Santi is glad to introduce a new, innovative SANTI 303 Thermovalve, which is the transition between the external battery and the elements of the heating system located under the drysuit. It replaces the standard inlet valve, as unlike a connector, it has two functions at the same time, an inlet valve and an integrated connector.

The new Santi 303 Thermovalve has a rotating head, which is an innovative solution in thermovalve design technology. Its great advantage is placing the cable with the E / O connector in the down position, with the possibility of turning the head by 270 degrees, which allows for trouble-free connection of the battery cable both in the position of the connector to the right and left. Until now, when using a "standard" thermo-valve, whose rotation range is only 90 degrees, with its trouble-free use by backmount divers, used by sidemount divers, unfortunately, it is necessary to point the power cable upwards in order to allow the positioning of the valve spigot to the right side. The swivel range completely eliminates such situations, so the new thermovalve can be called an extremely universal design in its application.

  • Rotating head (angle 270 °), equipped with a medium pressure connector
  • 270 ° moveable valve head for more convenient hose attachment which allows for optimal E/O cord and pressure hose settlement under the drysuit
  • Includes two electrical connectors on opposite sides of the cable - a connector for connecting with a battery adapted to work in water (E/O cord) and a waterproof connector for connecting a Heating System products from SANTI
  • Works with power supply no higher than 12V
  • Total length of the cables including plugs – about 55cm
  • Includes a two-piece nut
  • Available with „APEKS” or “SI-TECH” screw size

Tuotteen koko pakattuna tai myyntipakkauksen koko on arviolta 380 x 300 x 250 mm.


Paino
0,35 kg
(myyntipakkauksen kanssa 0,45 kg)


Valmistusmaa
Puola


Kommentit
Anonyymi vahvistettu ostaja, 14.12.2022
Yleisarvosana
Googlen kääntämäNäytä alkuperäinen
Toimii niinkuin pitääkin!
Anonyymi vahvistettu ostaja, 19.2.2022
Yleisarvosana
Googlen kääntämäNäytä alkuperäinen
Erittäin matala profiili kuivissa sviiteissä
Anonyymi vahvistettu ostaja, 19.1.2022
Yleisarvosana
Täyttöletkun 330asteen liikkuvuus helpottaa huomattavasti lämmityskaapelin lähtösuunnan valintaa.
Patrick S. vahvistettu ostaja, 30.12.2021
Yleisarvosana
Googlen kääntämäNäytä alkuperäinen
Ainoa todellinen vaihtoehto, kun on kyse virran syöttämisestä Santi-lämmitetyille laitteille. Rakastan venttiilin matalaa profiilia.
James G. vahvistettu ostaja, 23.12.2021
Yleisarvosana
Googlen kääntämäNäytä alkuperäinen
Erinomainen tuote! Se on paljon matalampi profiili kuin liitin, koska se yhdistää virtajohdon ja täyttölaitteen.
Lisää kommentti

Tuotemerkki


Katso myös



Tuotteet, joita on ostettu usein tämän tuotteen kanssa:



Blogi

Sukeltaminen voi jatkua talvellakin

Kylmää ja pimeää. Ei mitään nähtävää. Masentavaa. Vai onko? Jos ei ole kokeillut, niin ei voi tietää, saatika arvata, että talvisukeltaminen on ihan huippuhommaa. Näkyvyys on monesti uskomattoman kirkas ja talviunille uinuva vesistö on hiljainen ja meditatiivinen ympäristö.