Lajit» Sukellus» Kuivapuvut» Tarvikkeet» Lämpöliivijärjestelmät» Tuotepaketit»

Santi Öky-setti

Santi Öky-setti



Santi Extreme BZ 400 X Heated

Mittatilaus +96.95 $


Santi Heated Gloves 2.0, 1 pari


Santi Drysuit Connector

Apeks (Ø38mm)
Sitech (Ø32mm)

Santi 6 Ah akku

Toimitusaika arviolta 15 - 60 vrk.

Myymälä (Konala)hyllyssä0 kpl
Netistä toimitettavissa heti0 kpl

Santi 24 Ah akku

Toimitusaika arviolta 15 - 60 vrk.

Myymälä (Konala)hyllyssä0 kpl
Netistä toimitettavissa heti0 kpl

Tuotteen kuvaus
Santi Extreme BZ 400 X Heated:

Kysy myös mittatilausvaihtoehtoa! Mitta- ja erikoistilauspuvuissa toimitusaika n.6-8 vk.

Mittapukujen tilauksissa otathan yhteyttä.

Katso Santi aluspukujen mittataulukko.

HUOM: Jos haluat teettää mittatilaustyönä aluspuvun, niin pyydämme sinua ottamaan mittaukseen mukaan kaikki aluspukeutumiseen liittyvän, jota aiot käyttää aluspuvun alla (esim erityinen kerrasto, lämpöliivit tms lämmityselementit) Santin aluspuvut ovat luonteeltaan tyköistuvia, joten kaikki normaalisti käyttämäsi lisäpukeutuminen on huomioitava mittojen otossa.

Santi Heated Gloves 2.0:

The Santi heated gloves are designed as a part of the complex heating system consisting of the gloves, thermo valve/connector and an external battery canister. This configuration allows a diver to wear the gloves under the dry gloves and use them in line with a heating vest or heated undersuit, without an additional valve/bulkhead, or dangers associated with internal batteries. The heated gloves can also be used as a stand alone system using cables provided.

  • 36 W (pair)
  • Run time: 10 Ah / about 3 hours and 20 minutes of heating, 20 Ah / about 6 hours and 40 minutes of heating
  • Maximum heating temperature 45 °C
  • Made of breathable fabric
  • Keeps you warm even when the heating is off
  • Evenly distributed heating wiring that allows for freedom of movements in palms
  • Easy connection to Santi heated vest and undersuit
  • CE certified
Santi Drysuit Connector:

Drysuit Inflation valve connector is designed to be used with Santi heating system products. This adapter takes an external standard E/O connector through a standard suit inflation valve and provides power connection to a heated product under the drysuit.

  • Includes E/O cord to connect with the battery and waterproof plug compatible with Santi heating system products.
  • Works with power supply no higher than 12V.
  • Total length of the cables including plugs – 55 cm.
  • Height without the valve – 19 mm.
  • Apeks and Sitech screw size.
Santi 6 Ah akku:

SANTI DIVING BATTERY 6Ah – Designed for the Santi heating system.

• light, small and ergonomic container
• E / O cord connector with unique led illumination
• trouble-free piezoelectric switch
• belt loop (no need for clamps)
• charging through E / O cord connector
• the possibility of using for both the Santi heating system and lights
• modern design

Technical parameters of the battery

  • Capacity: 6 Ah
  • Operating voltage: 12 V
  • Height: 115 mm
  • Diameter: 74 mm
  • E/O cord length: 60cm
  • Material: polyacetal / POM / Delrin
  • Charging time: 4-5 hours
  • Operation depth: 100m
  • Weight: 680g

Burning times:

Heated Gloves: 160-180 mins

Heated Vest: 75-90 mins

Heated Vest + Heated Gloves: 35-45 mins

Santi 24 Ah akku:

This battery pack is manufactured with hi-tech rechargeable Li-Ion cells which offer high discharge current. As result, it may be used to supply power to equipment items which require 200W in total. On the top section of the canister there are an E/O cord connector, piezo switch, overpressure valve. There is also a belt loop (no need for clamps) on the side of the housing.

One touch is enough to turn battery on, which is indicated by built-in blue LED on the E/O cord connector. After each switch-on power status is presented. Number of flashes emitted by blue LED informs about the charge level.

  • 3 flashes of LED stand for 60%-100%
  • 2 flashes of LED stand for 30-60%
  • 1 flash of LED stands for < 30%
  • no light emitted by LED – fully discharged
  • after power level check battery resumes standard mode, what is indicated by constant LED light.

Battery is designed to supply power to SANTI heated apparel (undersuit, vest, gloves). However it may be also used with Halcyon Primary Diving Lights.

Operating time (heating) when heated equipment in use:
  • heated undersuit (110W): about 2h30min / 3h
  • heated vest (55W): about 5h / 6h
  • heated gloves (36W): about 9h / 10h
  • undersuit + gloves (146W): about 2h / 2h15min
  • vest + gloves (91W): about 3h15min / 3h45min
  • Halcyon Focus/Flare light (24 hours)

Technical parameters:

  • capacity: 24 Ah
  • operating voltage: 11,1 V
  • cells type: Li-Ion
  • height: 270 mm
  • diameter: 74 mm
  • E / O cord length: 60cm
  • housing material: polyacetal / POM / Delrin®
  • charging time: ~14h
  • max depth: 100m
  • weight: 1,8kg

Charger parameters:

  • supply voltage range: 100-265V AC 50-60Hz
  • input current: 1,8A
  • output voltage: 12,6VDC
  • output current: 3A
  • USB output: 5VDC 1A
  • output power: 90W
  • dimensions: 132mm x 58mm x 30mm
  • weight: 365g

Ostamalla tämän tuotepaketin säästät 65.92 $ verrattuna siihen, jos ostaisit tuotteet yksitellen.


Lisää kommentti

0 0