Lajit‪» Sukellus‪» Lämpöliivijärjestelmät‪» Tuotepaketit‪»

Santi Premium Set

Santi Premium Set


Hinta


Määrä
pakkaus(ta)



Santi Heating vest Flex 2.0

Koko
XS
Toimitusaika arviolta 15 - 60 vrk
S
Toimitusaika arviolta 15 - 60 vrk
M
Varastossa
L
Varastossa
XL
Varastossa
XXL
Varastossa
XXXL
Varastossa




Santi Heated Gloves 2.0, 1 pari

Koko
XS
Varastossa
S
Varastossa
M
Varastossa
L
Varastossa
XL
Varastossa
XXL
Varastossa




Santi 6 Ah akku



Varastossa

Myymälä (Helsinki)hyllyssä1 kpl heti
Myymälä (Helsinki)varastossa6 kpl heti
Netistä toimitettavissa heti7 kpl heti



Santi 24 Ah akku



Varastossa

Myymälä (Helsinki)hyllyssä0 kpl
Myymälä (Helsinki)varastossa1 kpl heti
Netistä toimitettavissa heti1 kpl heti



Santi 303 Thermovalve

Koko
Sitech
Varastossa
Apeks
Varastossa


Tuotteen kuvaus

Santi Heating vest Flex 2.0:

Santi heating vest is a product for those who seek the highest level of comfort during long and cold dives.

New Flex 2.0 heating vest, designed as part of Santi heating system which consists of such items as heated undersuit or heated vest, valve thermoconnector or thermovalve and external battery. This configuration allows a diver to use the heating system without necessity of using any additional valves and without any dangers associated with internal battery system.

The vest was designed to provide the highest functionality and safety. Thanks to fabrics used, the vest provides thermal comfort even after your battery is drained.

Made of very flexible Climashield insulation fabric with weight of 180g/m2 it consists of three layers – breathable Climashield Contour insulation covered with two protective layers made of polyester from the inside and outside. The external layer has also windproof properties.

The newest version of Santi heating vest, thanks to new, non-quilted fabric quality provides more warmth towards the body. It generates better thermal properties and keeps the heat trapped closer to the body for longer.

  • Climashield Contour fabric – stretchable threads properties, resistant to wear and tear,
  • weight 180g/m2,
  • isolation: 0.96 CLO,
  • side and crotch adjustable, rubber bands to allow best circumference and length adjustment,
  • handy pocket for power cord,
  • p-valve hose opening,
  • maximum heating temperature: 45ºC,
  • maximum heating power: 55W,
  • battery running time:
  • SANTI 6Ah: 1h30min of heating,
  • SANTI 24Ah: 5-6h of heating,
  • safety switch preventing from overheating and too strong current,
  • new generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking,
  • innovative, synthetic power cable resistant to high temperatures and cuts, hidden in a handy pocket,
  • ergonomic nesting and wires layout inside,
  • special vest bag included.

ATTENTION!
Works only with SANTI thermovalve and SANTI thermoconnector.

Viileiden vesien sukellus- ja pukeutumisfiilistelyä blogissamme.

Santi Heated Gloves 2.0:

The Santi heated gloves are designed as a part of the complex heating system consisting of the gloves, thermo valve/connector and an external battery canister. This configuration allows a diver to wear the gloves under the dry gloves and use them in line with a heating vest or heated undersuit, without an additional valve/bulkhead, or dangers associated with internal batteries. The heated gloves can also be used as a stand alone system using cables provided.

  • 36 W (pair)
  • Run time: 10 Ah / about 3 hours and 20 minutes of heating, 20 Ah / about 6 hours and 40 minutes of heating
  • Maximum heating temperature 45 °C
  • Made of breathable fabric
  • Keeps you warm even when the heating is off
  • Evenly distributed heating wiring that allows for freedom of movements in palms
  • Easy connection to Santi heated vest and undersuit
  • CE certified
Santi 6 Ah akku:

SANTI DIVING BATTERY 6Ah – Designed for the Santi heating system.

• light, small and ergonomic container
• E / O cord connector with unique led illumination
• trouble-free piezoelectric switch
• belt loop (no need for clamps)
• charging through E / O cord connector
• the possibility of using for both the Santi heating system and lights
• modern design

Technical parameters of the battery

  • Capacity: 6 Ah
  • Operating voltage: 12 V
  • Height: 115 mm
  • Diameter: 74 mm
  • E/O cord length: 60cm
  • Material: polyacetal / POM / Delrin
  • Charging time: 4-5 hours
  • Operation depth: 100m
  • Weight: 680g

Burning times:

Heated Gloves: 160-180 mins

Heated Vest: 75-90 mins

Heated Vest + Heated Gloves: 35-45 mins

Santi 24 Ah akku:

This battery pack is manufactured with hi-tech rechargeable Li-Ion cells which offer high discharge current. As result, it may be used to supply power to equipment items which require 200W in total. On the top section of the canister there are an E/O cord connector, piezo switch, overpressure valve. There is also a belt loop (no need for clamps) on the side of the housing.

One touch is enough to turn battery on, which is indicated by built-in blue LED on the E/O cord connector. After each switch-on power status is presented. Number of flashes emitted by blue LED informs about the charge level.

  • 3 flashes of LED stand for 60%-100%
  • 2 flashes of LED stand for 30-60%
  • 1 flash of LED stands for < 30%
  • no light emitted by LED – fully discharged
  • after power level check battery resumes standard mode, what is indicated by constant LED light.

Battery is designed to supply power to SANTI heated apparel (undersuit, vest, gloves). However it may be also used with Halcyon Primary Diving Lights.

Operating time (heating) when heated equipment in use:
  • heated undersuit (110W): about 2h30min / 3h
  • heated vest (55W): about 5h / 6h
  • heated gloves (36W): about 9h / 10h
  • undersuit + gloves (146W): about 2h / 2h15min
  • vest + gloves (91W): about 3h15min / 3h45min
  • Halcyon Focus/Flare light (24 hours)

Technical parameters:

  • capacity: 24 Ah
  • operating voltage: 11,1 V
  • cells type: Li-Ion
  • height: 270 mm
  • diameter: 74 mm
  • E / O cord length: 60cm
  • housing material: polyacetal / POM / Delrin®
  • charging time: ~14h
  • max depth: 100m
  • weight: 1,8kg

Charger parameters:

  • supply voltage range: 100-265V AC 50-60Hz
  • input current: 1,8A
  • output voltage: 12,6VDC
  • output current: 3A
  • USB output: 5VDC 1A
  • output power: 90W
  • dimensions: 132mm x 58mm x 30mm
  • weight: 365g
Santi 303 Thermovalve:

Santi is glad to introduce a new, innovative SANTI 303 Thermovalve, which is the transition between the external battery and the elements of the heating system located under the drysuit. It replaces the standard inlet valve, as unlike a connector, it has two functions at the same time, an inlet valve and an integrated connector.

The new Santi 303 Thermovalve has a rotating head, which is an innovative solution in thermovalve design technology. Its great advantage is placing the cable with the E / O connector in the down position, with the possibility of turning the head by 270 degrees, which allows for trouble-free connection of the battery cable both in the position of the connector to the right and left. Until now, when using a "standard" thermo-valve, whose rotation range is only 90 degrees, with its trouble-free use by backmount divers, used by sidemount divers, unfortunately, it is necessary to point the power cable upwards in order to allow the positioning of the valve spigot to the right side. The swivel range completely eliminates such situations, so the new thermovalve can be called an extremely universal design in its application.

  • Rotating head (angle 270 °), equipped with a medium pressure connector
  • 270 ° moveable valve head for more convenient hose attachment which allows for optimal E/O cord and pressure hose settlement under the drysuit
  • Includes two electrical connectors on opposite sides of the cable - a connector for connecting with a battery adapted to work in water (E/O cord) and a waterproof connector for connecting a Heating System products from SANTI
  • Works with power supply no higher than 12V
  • Total length of the cables including plugs – about 55cm
  • Includes a two-piece nut
  • Available with „APEKS” or “SI-TECH” screw size


Ostamalla tämän tuotepaketin säästät 80.93 $ verrattuna siihen, jos ostaisit tuotteet yksitellen.

Kommentit
Lisää kommentti

Tuotemerkki