Lajit‪» Sukellus‪» Lämpöliivijärjestelmät‪» Tuotepaketit‪»

Santi Heated Vest Set

Santi Heated Vest Set



Santi Heating vest Flex 2.0

Toimitusaika arviolta 15 - 60 vrk
Toimitusaika arviolta 15 - 60 vrk

Santi 6 Ah akku


Myymälä (Helsinki)hyllyssä1 kpl heti
Myymälä (Helsinki)varastossa6 kpl heti
Netistä toimitettavissa heti7 kpl heti

Santi Drysuit Connector

Apeks (Ø38mm)
Sitech (Ø32mm)

Yleisarvosana ()

Tuotteen kuvaus

Santi Heating vest Flex 2.0:

Santi heating vest is a product for those who seek the highest level of comfort during long and cold dives.

New Flex 2.0 heating vest, designed as part of Santi heating system which consists of such items as heated undersuit or heated vest, valve thermoconnector or thermovalve and external battery. This configuration allows a diver to use the heating system without necessity of using any additional valves and without any dangers associated with internal battery system.

The vest was designed to provide the highest functionality and safety. Thanks to fabrics used, the vest provides thermal comfort even after your battery is drained.

Made of very flexible Climashield insulation fabric with weight of 180g/m2 it consists of three layers – breathable Climashield Contour insulation covered with two protective layers made of polyester from the inside and outside. The external layer has also windproof properties.

The newest version of Santi heating vest, thanks to new, non-quilted fabric quality provides more warmth towards the body. It generates better thermal properties and keeps the heat trapped closer to the body for longer.

  • Climashield Contour fabric – stretchable threads properties, resistant to wear and tear,
  • weight 180g/m2,
  • isolation: 0.96 CLO,
  • side and crotch adjustable, rubber bands to allow best circumference and length adjustment,
  • handy pocket for power cord,
  • p-valve hose opening,
  • maximum heating temperature: 45ºC,
  • maximum heating power: 55W,
  • battery running time:
  • SANTI 6Ah: 1h30min of heating,
  • SANTI 24Ah: 5-6h of heating,
  • safety switch preventing from overheating and too strong current,
  • new generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking,
  • innovative, synthetic power cable resistant to high temperatures and cuts, hidden in a handy pocket,
  • ergonomic nesting and wires layout inside,
  • special vest bag included.

Works only with SANTI thermovalve and SANTI thermoconnector.

Viileiden vesien sukellus- ja pukeutumisfiilistelyä blogissamme.

Santi 6 Ah akku:

SANTI DIVING BATTERY 6Ah – Designed for the Santi heating system.

• light, small and ergonomic container
• E / O cord connector with unique led illumination
• trouble-free piezoelectric switch
• belt loop (no need for clamps)
• charging through E / O cord connector
• the possibility of using for both the Santi heating system and lights
• modern design

Technical parameters of the battery

  • Capacity: 6 Ah
  • Operating voltage: 12 V
  • Height: 115 mm
  • Diameter: 74 mm
  • E/O cord length: 60cm
  • Material: polyacetal / POM / Delrin
  • Charging time: 4-5 hours
  • Operation depth: 100m
  • Weight: 680g

Burning times:

Heated Gloves: 160-180 mins

Heated Vest: 75-90 mins

Heated Vest + Heated Gloves: 35-45 mins

Santi Drysuit Connector:

Drysuit Inflation valve connector is designed to be used with Santi heating system products. This adapter takes an external standard E/O connector through a standard suit inflation valve and provides power connection to a heated product under the drysuit.

  • Includes E/O cord to connect with the battery and waterproof plug compatible with Santi heating system products.
  • Works with power supply no higher than 12V.
  • Total length of the cables including plugs – 55 cm.
  • Height without the valve – 19 mm.
  • Apeks and Sitech screw size.

Ostamalla tämän tuotepaketin säästät 25.75 $ verrattuna siihen, jos ostaisit tuotteet yksitellen.

Anonyymi 10.2.2021
Oikein hyvä
Lisää kommentti