Sports‪» Plongée sous-marine‪» Détendeurs‪» Détendeurs 1er & 2ème étage‪» Packs détendeurs pour mono-bouteilles‪»

Apeks MTX-RC Regulator DIN

Apeks MTX-RC Regulator DIN


Prix promotionnel
696,53 + frais de livraison
L'offre se termine dans
Prix normal 799,90 €
TVA comprise 25.5 %


Quantité
unité



Magasin (Helsinki)sur étagère0 unités
Disponible dans boutique en ligne0 unités


Dans le cas de ce produit, le nombre maximal qui peut être commandé est celui que nous avons disponible en stock.
Disponibilité
Environ 14 - 30 jour(s) à partir de la commande. La fiabilité de l'évaluation est un peu incertain.

Disponibilité
Informez-moi lorsque ce produit est disponible en stock


Évaluations
Note globale ()


Description du produit

Go warm, go cold, go deep, go anywhere. Enjoy control in the extreme with the MTX-RC scuba diving regulator. Combining rugged, military grade engineering with the super-smooth breathing experience that Apeks regulators are renowned for, the MTX-RC is the regulator that lets you explore more.

Featuring the same freeze-resistant technology enjoyed by the whole MTX-R range, the MTX-RC resists free-flows in even the coldest temperatures, while offering the user the additional flexibility to adjust the settings for a more comfortable breathe in less extreme environments.

All this is achieved using an innovative first stage design that protects the regulator from freezing and a full set of user controls on the second stage to adjust the breathing performance based on the diver’s individual needs.

First Stage

  • Satin plated brass body with heat exchanging ribs for maximum thermal performance.
  • Break through, innovative over-moulded first-stage endcap and environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
  • Ribbed diaphragm clamp for improved heat exchange in cold water conditions.
  • Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth.
  • 5 x medium pressure ports, 4 mounted on a rotating turret for improved hose orientation
  • 2 x angled high pressure ports for optimal hose routing and fitting of transmitters.
  • Double swivel hose for greater freedom of movement and comfort.
  • Easy to grip DIN hand-wheel or over-moulded yoke hand-wheel, only requires one hand to release.
  • DIN, Yoke and M26 Thread available, 300bar, 232bar and M26 300bar (O2) respectively.
  • Tested for Octopus use - EN250A to 60 metres cold water.
  • Nitrox/Oxygen compatible – Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection.

2nd Stage

  • Protective bumpers to protect the second stage from impacts and scratches in the most vulnerable places.
  • Ergonomic and simple to use venturi lever.
  • Oversize breathing effort adjuster makes adjustment easy in cold water whilst wearing gloves.
  • Large purge button.
  • Reversible second stage for either a left or right hand gas supply configuration.
  • A heat exchanger (patented) dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water for a more comfortable breathe.
  • Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. The regulator is supplied with both sets of exhaust tees.
  • Comfo-bite mouthpiece
  • Flexible nylon braided hose, which has better cold water performance than traditional rubber hose.
  • Designed and manufactured in the UK.
  • No single use plastic in the packaging

Certified to: EN250A
Temp range: 0.5°C - 55°C
Connection: DIN
Nitrox/Oxygen compatible: Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection.


Les dimensions du produit emballé ou de l'emballage de vente sont environ : 395 x 355 x 165 mm.


Poids
2,4 kg(Comprend le poids de l'emballage de vente éventuel)


Garantie
12 mois


Pays de fabrication
Grande-Bretagne


Commentaires
Sabri H. acheteur vérifié, 20.4.2024
Note globale
Traduit par GoogleMontrer l'original
Le produit a été expédié immédiatement lors de ma commande car ils l'ont en stock. Bien emballé une fois reçu. Il est plus lourd que la plupart des régulateurs, mais c'est ce que l'on attend d'une machine comme celle-ci. Le produit semble très solide et résistant. Je l'ai pris pour un essai de plongée et il a fonctionné comme il était commercialisé, une respiration sans effort, sans problème. De toute évidence, ils ont été bien testés.
Christopher H. acheteur vérifié, 11.4.2024
Note globale
Traduit par GoogleMontrer l'original
Le meilleur regu que vous puissiez trouver et le prix est bon.
Commenter

Marque