Ursuit Heavy Light Rescue FZ

Thanks to the material together with the lightness of the material used, the outer water resistance is extremely small. The friction is the same as that of a wet suit.

The air is distributed inside the suit parts in a very even manner and the possibility of its movement inside is minimised.

The hood is made of 5 mm thick neoprene. A yellow safety stripe on the hood. An attention has been paid to the ergonomy of the hood by refining its construction for several years. The result is a dry hood that follows the shape of the user s face and head in a pleasant manner.
- The face seal is made of a Sandwich material, with smooth neoprene rubber on the outside as well as on the inside, with reinforcing nylon in between. The face seal fits both full-face masks and half masks being at the same time durable.
-The wrist seals are of bottleneck type
- The sleeves are anatomically formed into the correct diving position. Due to problems
related with the manufacturing, this feature may not be found in any other suits and is highly appreciated by professional divers, as it gives increased comfort by freeing the course of the arms when working.
- The outlet valve is manufactured by SI Tech. It requires practically no service at all, as
its mechanism is protected from inner fluff and dirt by a filter. Thanks to the low profile, the valve is not inconvenient when donning or doffing. Automatic. The winner of the test carried out by the Swedish Army.
The swivelling inlet valve is equipped with a large push button and with quick connection.
- The front zipper allows you to don and doff without assistance.
- The integrated suspenders keep the lower part of the suit up (the trousers do not hang at the crotch) and the crotch strap keeps the upper part of the suit down
- The freedom of movement allowed by the telescope waist is one of the main features of the suit.
- The neoprene boot keeps your foot warm and the rubber vulcanising creates a firm support, while being elastic. The heel has a strap retainer, which prevents the fin from accidentally dropping off.
- Thigh Pocket
- D-Rings at Waist have been designed for the attaching of light equipment such as lamps, etc.
- Integrated loops at the inner waist help you to hang the suit for drying. The upper part of the suit is turned inside out and the suit dries quickly on the inside also