Ammonite Led Stingray Mark II Video Set

The Led Stingray Video Mark II is an all-around, compact and powerful dive light. It weighs only 137g (210g with battery) and is only 12cm long! Three high-performance next-generation CREE LEDs are used. The torch emits a maximum of 1300 lumens light output in a cool white colour temperature. The light is evenly emitted in a wide, over 120-degree beam angle.

The led torch is powered by a 21700 Li-Ion battery that provides long runtime (about 2 hours) and is characterized by a long lifespan (up to 500 charging cycles with up to 75% capacity) as well as a high level of safety. Due to the built-in PCM, the battery is protected against overcharging, over-discharge, and short-circuit. 
 
The battery is equipped with a very convenient charging system that uses the built-in USB-C port. The set comes with two rechargeable 21700 Li-ion batteries and a USB-C cable, which can be used to charge the batteries from any power source (charger, power bank, laptop, computer, or a car USB charger). The batteries can also be charged with chargers dedicated to standard 21700 Li-Ion batteries.

Additionally, there is a built-in bi-colour LED in the positive pole of these batteries. It informs the user about the current charging status (red indicates the charging process / blue means that the battery is fully charged). Due to the lack of memory effect, the batteries can be recharged at any time without negatively affecting their capacity and battery life.
  
The body of the torch is made of a light but very rigid and mechanically durable polymer (polyacetal, POM). This material is highly resistant to environmental factors (highly saline water, UV radiation, high temperature). The head is moulded with precision from a single piece of aluminium alloy. The alloy used is resistant to corrosion in seawater. The leds are protected by 6 mm of tempered glass resistant to scratches and mechanical damage. The aluminium head of the flashlight is covered with a protective layer of hard anodising. Compared to conventional coatings, the hard anodising coating is much thicker and provides exceptionally high resistance to mechanical damage (e.g. scratching or abrasion), as well as additional protection against corrosion. This torch is constructed in such a way that it ensures its safe usage at a depth of up to 200 m.
  
The flexible arms are very light, durable and modular construction – you can easily extend them by adding the additional corals to extend their reach and make them suit your needs best.

Specifications 

Light output	up to 1300 lm
Total power	10 W
Spot angle	120º
Colour temperature	cool white
Front glass	6 mm tempered
Power source	1 x 21700 protected rechargeable cell with USB type-C charging port
Switch type	by tightening on/off
Max. operation depth	200 m
Light source	3 × high efficiency CREE LED

Included 
2 x Led Stingray Video Mark II
2 x battery Li-Ion 21700 with USB Type C charging port
1 x pouch for storage batteries
1 x USB charger
1 x USB type-C cable
2 x flexible arms with mounting for Led Stingray Video Mark II torches
1 x tray for camera and arms
1 x carrying a plastic box

Materials
Hard anodised aluminium alloy, Delrin®