Peaty's Tubeless Sealant 1 liter

Shake the packaging vigorously before every use to ensure an even distribution of platelets.

Rinse away any dirt, oil and other sealants from the tyre and dry off completely. 

Seat both sides of your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. If using a track pump, a good tip is to remove the valve core before inflating as doing so allows a greater volume of air into the tyre and so helping it to seat more easily.

Deflate the tyre fully, taking care to keep the tyre bead fully seated on the rim.

Remove the valve core from the valve and put it in a safe place (you'll need to put it back in shortly!)

With the valve at the three o’clock position, push the pouch directly onto the valve (120ml Trail Pouch) or use the flexible injector pipe provided (500ml or 1L Workshop Bottle) to inject the desired amount of sealant directly through the de-cored valve.

Re-insert the valve core and re-inflate the tyre to desired pressure.

Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water.

GO RIDE! This will disperse the sealant around the inside of your tyre and rim sealing any small gaps.