Start
1 produtos
Start Grip Tape Classic
Disponibilidade
O produto está temporariamente esgotado.
Disponibilidade detalhada
Quero ser avisado quando houver mais stock do produto
Avaliações
Descrição do produto
Temperatura máxima
+5 °C
Temperatura mínima
-20 °C
Peso
0,08 kg
(com embalagem de venda 0,082 kg)
País de origem
Finlândia
Comentários
Adicionar comentário
Marca
O produto está temporariamente esgotado.
Disponibilidade detalhada
Quero ser avisado quando houver mais stock do produto
Avaliações
| Classificação geral | (10 avaliações) |
Descrição do produto
Well tested Start Grip Tape and Start Grip Tape Sport are easy toadjust by following the application instructions in the package.They are well suited for all skiers who appreciate reliable anddurable kick waxing. For most skiers it lasts the whole season. Suitable for conditions +5°...-20°C (34°...-4°F).
1. Clean the grip area thoroughly with Start Grip Tape cleaner or Start Wax remover. Be sure that the grip zone is completely dry after cleaning. You may dry out the cleaner with hot air gun or hair dryer.
2. Abrade the cleaned grip wax zone with the sandpaper on the side of the box. Abrade the grip zone first across and then back and fort. It is important that the whole grip zone is thoroughly abraded. Wipe the base clean with Start polishing fibre.
3. Apply the tip of Start Grip Tape onto the beginning of the cleaned and abraded grip zone. Press the Grip Tape onto the base. Draw the Grip Tape with the box. At the same time push the guide of the box lightly towards the side of the ski. This is how you get the Grip Tape straight.
4. Cut the Grip Tape off as follows: First press the brake with finger. Turn the box upwards. Push the cutting edge towards the Grip tape. Twofold the tip (1 cm) of the tape in the box after cutting.
5. Push Start Grip Tape tightly on the base with the side of the Tape box to get air bubbles away from between the base and the tape. Push both ends of the tape very tightly.
6. Remove the paper with one quick draw. If there still exist some light spots on the tape, put the paper back and push the tape tighter onto the base. This is how you can be sure that the tape sits well. Remove the paper.
7. Let the skis cool down outside. The skis are ready for skiing. Don’t touch onto the Grip Tape with hands. Don’t press the skis together so that the grip zones touch each other.
8. Remove the Grip Tape with Start XC-scraper. Moisten the scraper with Start Grip Tape Cleaner. Push the diagonal edge of the scraper towards the base. Draw the tape off. Clean the base with Start Grip Tape Cleaner.
O tamanho do produto embalado ou da embalagem de venda é aproximadamente 100 x 100 x 40 mm.
Temperatura máxima
+5 °C
Temperatura mínima
-20 °C
Peso
0,08 kg
(com embalagem de venda 0,082 kg)
País de origem
FinlândiaComentários
| Classificação geral |
Super très bon produit retrouve le plaisir du ski de fond sans fartage à recommander domage un peu cher
| Classificação geral |
Haasteita teippitartunnan kanssa.
| Classificação geral |
Start tape has worked really well at colder temperatures 5-20 deg F. I have not tested for longevity or warmer temps. Not quite as fast as temperature specific was, but I’ll be really happier with it if it works in warmer temps avoiding using klister.
| Classificação geral |
Produkten är inte ny, har använt den i många år och det är endast inköpsstället som är nytt. Den var inte tillgänglig på den orten jag bor.
Leveranstiden var ganska lång, men produkten inget att klaga på.
| Classificação geral |
Mäßig
Ei toiminut plussakelillä ollenkaan. Musta teippi kyllä toimii mainiosti pakkasella. Punaisen sijaan valitsen jatkossakin zerot. Tätä ajattelin päiville, jolloin aamulla pakkasta ja iltapäiväll plussaa, mutta ei mitään pitoa, kun keli reilusti plussalla.
Gutes Produkt. Gutes Video. Hab die rote Box gekauft, genauso angewendet, funktioniert gut bei heutiger Außentemperatur 5-10 Grad Plus.
Marca
START - Pitoteipin laitto ja poisto
