Arisaka Offset Optic Plate Only

A complete offset optic mount requires both a base and one optic plate. This product listing is only for purchasing spare plates.

Standard height (for 1.5" to 1.8" scope mounts):

Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
Plate 3: C-More, Vortex Razor, SIG Romeo 3
Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS
Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530
Plate 6: Aimpoint Acro
Plate 13: Holosun 509T
Plate 15: SIG Romeo 1 and Romeo 1 Pro

Tall height (1.9" to 2.2" scope mounts):

Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS
Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530
Plate 12: Aimpoint Acro
Plate 14: Holosun 509T
Plate 16: SIG Romeo 1 and Romeo 1 Pro

Do not exceed 20 inch lbs of torque on the screws that attach the optic to the plate.

Made in the USA.

Each plate is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.  Please refer to the instructions for torque values and mount configuration. Plates include new screws (where needed) which we recommend using over the OEM screws, as long as the lengths are appropriate (pay attention while assembling). The Leupold DPP plate 4 and 10 include extra long screws to attach the optic to the plate that require a 2.5mm Allen key.