ocenyHoudini
71 produktów
Sporty» Na powietrzu» Odzież» Kurtki» Ski Jackets»
Houdini Rollercoaster Jacket Mens
Dostępność
Natychmiast. Możesz zamówić ten produkt maksymalnie w ilości dostępnej w naszym magazynie. The product will be removed from our product range.
Dostępność w magazynach
Oceny
Opis produktu
The Houdini Men's Rollercoaster Jacket is made in a slightly longer fit with a backdrop for extra weather protection and an integrated snowskirt will keep you dry when you tomahawk on a powder run. Two angled vent zippers under your arms keeps you cool without getting in the way of backpack straps. The generous hood with double adjustments will keep you sheltered in any storm, goes over a helmet and can be operated with a single glove-clad hand. When it comes to pockets, you have two roomy hand pockets, one outside chest pocket and one inside. All seams are taped and all zippers water resistant.
Waterproofness: 20,000 mm H2O or higher
Breathability: 20,000 g/m2/24h
Weight
698 g (size L)
169g / sqm
Size and fit
Fit: Regular fit
Materials
Main material: 70% recycled polyester, 30% polyester face fabric
Membrane: Atmos, 100% Polyester
Backing fabric: 100% polyester jersey
DWR finish, PFAS-Free
Sustainability
Care Instructions Shell clothes with membrane
Air out clothes instead of washing them to save water, energy and to make the garments last longer. Make sure to wash your shell if it has been used in saltwater or has gotten very sweaty or dirty as this weakens the performance of the garment. They can reduce the fabric’s breathability and damage the water repellent surface. The dirt can even allow for moisture to leak through the fabric.
Use a washing bag to protect your garments and to prevent fibers from leaking. When cleaning the bag and filter in the machine, make sure to wipe it clean and throw the lint in your trash can. Never rinse it in water since we don’t want the fibers to end up in lakes or oceans.
Machine wash cold.
There are special detergents for shells, but mild, environmentally certified detergents work just as fine. Make sure to use the right dose.
Avoid fabric softener. Besides being harmful for our environment, they have a negative impact on the garment performance, mainly moisture transportation and breathability.
Hang dry. Just remember to introduce heat to the garment after washing to reactivate the water resistant surface of the outer fabric. Use a drying cabinet, dryer or iron. Make sure you monitor the heat so the garment does not melt.
You can reapply or enforce the water repellent treatment with a wash-in or spray when needed. Always use an organic DWR.
Remember to introduce heat to the garment after washing to reactivate the water resistant surface of the fabric.[piilo_loppu
Płeć
Mężczyźni
Waga
0,7 kg
(wraz z opakowaniem 0,9 kg)
Kraj produkcji
Estonia
KomentarzeDodaj komentarz
Marka
Natychmiast. Możesz zamówić ten produkt maksymalnie w ilości dostępnej w naszym magazynie. The product will be removed from our product range.
Dostępność w magazynach
Oceny
| Ogólna ocena | (1 ocena) |
Opis produktu
The Houdini Men's Rollercoaster Jacket is made in a slightly longer fit with a backdrop for extra weather protection and an integrated snowskirt will keep you dry when you tomahawk on a powder run. Two angled vent zippers under your arms keeps you cool without getting in the way of backpack straps. The generous hood with double adjustments will keep you sheltered in any storm, goes over a helmet and can be operated with a single glove-clad hand. When it comes to pockets, you have two roomy hand pockets, one outside chest pocket and one inside. All seams are taped and all zippers water resistant.
- Designed with Made-to-Move technology
- Waterproof & breathable
- Fully sealed seams
- Water repellent zippers
- Adjustable, helmet-compatible hood
- Backpack compatible ventilation under arm
- Built-in snow gaiter
- Sleeve endings with velcro adjusted gussets
- Zippered bellow hand pockets big enough for skins
- Bellow chest pocket
- Zippered inside chest pocket
- Adjustable in bottom hem
- PFAS-free water repellency treatment
- Made recycled & recyclable fabrics
- Bluesign®-certified fabrics
- Fabric made in Japan, garment produced in Estonia
Waterproofness: 20,000 mm H2O or higher
Breathability: 20,000 g/m2/24h
Weight
698 g (size L)
169g / sqm
Size and fit
Fit: Regular fit
Materials
Main material: 70% recycled polyester, 30% polyester face fabric
Membrane: Atmos, 100% Polyester
Backing fabric: 100% polyester jersey
DWR finish, PFAS-Free
Sustainability
Care Instructions Shell clothes with membrane
Air out clothes instead of washing them to save water, energy and to make the garments last longer. Make sure to wash your shell if it has been used in saltwater or has gotten very sweaty or dirty as this weakens the performance of the garment. They can reduce the fabric’s breathability and damage the water repellent surface. The dirt can even allow for moisture to leak through the fabric.
Use a washing bag to protect your garments and to prevent fibers from leaking. When cleaning the bag and filter in the machine, make sure to wipe it clean and throw the lint in your trash can. Never rinse it in water since we don’t want the fibers to end up in lakes or oceans.
Machine wash cold.
There are special detergents for shells, but mild, environmentally certified detergents work just as fine. Make sure to use the right dose.
Avoid fabric softener. Besides being harmful for our environment, they have a negative impact on the garment performance, mainly moisture transportation and breathability.
Hang dry. Just remember to introduce heat to the garment after washing to reactivate the water resistant surface of the outer fabric. Use a drying cabinet, dryer or iron. Make sure you monitor the heat so the garment does not melt.
You can reapply or enforce the water repellent treatment with a wash-in or spray when needed. Always use an organic DWR.
Remember to introduce heat to the garment after washing to reactivate the water resistant surface of the fabric.[piilo_loppu
Przybliżony rozmiar zapakowanego towaru lub rozmiar opakowania produktu to 590 x 500 x 100 mm.
Płeć
Mężczyźni
Waga
0,7 kg
(wraz z opakowaniem 0,9 kg)
Kraj produkcji
EstoniaKomentarzeDodaj komentarz
Marka