Start SFR30 Fluor Pulver

Fluor powder, especially suitable for new snow, and snowing conditions, when humidity is >75 % and temperature +5°...-5°C

Hot Application
1. Spread the powder evenly (PF550 and PF750 more heavily) on to a pre prepared base surface.
2. Melt the powder with a waxing iron +130°C (Note! PF550 and PF750 +150°C), until the wax forms into a smooth layer on the surface of the base.
3. Let it cool down completely and scrape off lightly the excess wax and then brush off with a nylon brush and with a finishing brush.

Polymer fluor powders require a very high melting temperature (+150°C). Because of this high melting temperature, polymer fluor powders need to be spread onto the base more heavily than other powders.



Cold Application:
1. Spread the powder evenly on to a pre prepared base surface.
2. Adhere the powder to the base by rubbing with a natural cork and brush with a finishing brush.
The powder stays on the base for a short performance when applied cold and is therefore best suitable for short distance skiing.