Nathan Orion Strobe

• A single lighting / strobe solution to both see and be seen
• Nathan's most powerful clip-on light has USB recharge port integrated in to design (no cord necessary)
• White 30 lumen LED light to brighten the path ahead, plus a red strobe for safety 
• Equipped with its own waist belt to clip Orion on to
• IPX4 weather-resistant for use in any weather

A single solution to see and be seen. Our most powerful clip light with USB recharge powers one 30-Lumen crystal white LED to light the path ahead of you and 3 well-positioned LED strobes to allow you to be seen. Clip the strobe to the Orion Belt for a perfect fit over your clothes.

Usage Instructions:

• To turn on, press and hold power button for 2-3 seconds.
• Press power button again to cycle through 4 different strobe / lighting combination modes.
• To turn off, press and hold power button for 2-3 seconds.

To Recharge: 

• Flip out micro USB charge port built in to back of Orion. Plug charge port in to USB power supply (200mA minimum).
• Charge time 3 hours (there is no recharge indicator light on Orion, so be sure to charge for minimum of 3 hours when fully depleted).
• When fully charged, unplug Orion from USB power supply and return charger port to closed position prior to next usage.

• LED: 4 LEDs - 1 Crystal White LED - 30 Lumens / 3 Red LEDs - 6 Lumens
• Battery: Li-Ion Rechargeable via USB (minimum 
• Burn Time: On - 5 hours, Strobe - +30 hours
• Water Resistance: IPX4 – Weather resistant
• 4 modes: 1) Red Steady + White Off 2) Red Steady + White Strobe 3) Red Strobe + White Steady 4) Red Off + White Steady
• Charge Time: 3 Hours
• Minimum USB charger amperage: 200mA