Reviews

— Show original

A really good holster for ipsc shooting

— Show original

Ok case for basic use on the track. Cheap and surprisingly stays securely in place during operation. When using a standard belt, you have to screw it into the belt every time, and then remove it from the belt. The screws are also a bit too long. A quick release would be more convenient, or if you get the right belt just for this job. However, according to the description, this fits 40mm or less belts, many belts are 45mm / 1.75", I haven't tested whether it fits, it only came to mind afterwards.

— Show original

The case was really rough work inside. I had to sand the inside smooth with water and fine sandpaper because otherwise I scratched the plastic-framed gun and the pull was really sticky. The quality of Ghost these days is really bad!

— Show original

Made for Glock and it fits there. So far it has seemed durable. So it doesn't include safety devices and locks that some sports require, but I don't need them myself (just friction).

— Show original

Fits well, easy to adjust, feels a little plastic, but that's what it is.

— Show original

Works!

— Show original

Works

— Show original

Good friction holster for Glock.

— Show original

A high-quality case.

— Show original

Excellent price-quality ratio. More for sports than combat, although it would work there

— Show original

Sturdy and gets his point across. The price is right for the quality.

— Show original

Price-quality ratio - a good pistol case for functional shooting.

— Show original

Best budget holster

Solid construction. Only drawback is that it doesn’t fit on thicker 50 mm gun belts (the screws are too short).

— Show original

Good quality at a good price. perfect for production division

— Show original

Basic friction case.

— Show original

A sturdy basic case.

— Show original

Good quality holster, the gun fits well, the holster works well for ipsc and sra work.

— Show original

Good case, always works.

— Show original

A well-functioning basic case.

— Show original

A good basic case. Shadow 1 goes into the case the best. Shadow 2 sticks too tightly even with the friction control fully open.

— Show original

Cheap and good

— Show original

Good basic case, price-quality right. The CZ P-10 F fits, but part of the front sight remains visible.

— Show original

Good price quality ratio. Does not fit in a wide belt.

— Show original

Pretty good basic case in its price range. The adjustable friction lock is sturdy. The fastening system limits the fastening to wider belts, but itself works in a 50mm molle belt with little tuning.

— Show original

Good and functional case. It doesn't go directly to the Walther Q5 match sf model, but by applying it, I was able to tweak it.

Very easy to use and install. Delivery very fast to Estonia - Would recommand the product

Great holster. Retains the gun securely even without a button/lock which allows for a quick draw.

— Show original

Good case.

— Show original

Not to blame. Inexpensive and durable friction holster. The belt fastening could be a little smarter, so star out of it.

— Show original

Good case for a beginner. Simple and functional friction lock. The glocks sit firmly, the traction and enclosure feel safe.

— Show original

An affordable basic holster, however, works well for beginner use. Attaching to a thicker IPSC belt is a little tight but is successful if you remove the others of the clamps while inserting the screw.

— Show original

Good case for practical shooting, well suited for CZ P-10 C, screws can be used to adjust the tightness, if you still had a gun locking system, it would be perfect

— Show original

Yes, it now brings a worker to avoid IPSC exercise and a spare case. Nominally suitable for both CZ75 SP01 and Shadow 2 - the first one is loose and there is a feeling that the gun is jumping out of the case all the time, for Shadow 2 the fit is reasonable and now there is a few shots in Kisak for lack of better and no success. Feel in hand very plastic and "cheap", but basically ok.

— Show original

Sturdy basic friction housing, into which the standard Glock slides nicely.

— Show original

Good case. I personally use sra. There could be more adjustment options and a fit to a 50mm belt would be a plus.

— Show original

Fits well with CZ Shadow 2,

— Show original

Yeah, but it doesn't work with all belts. Eg M05 Edge belt too wide. The case itself is good, but you have to buy a new belt. Sure, a slightly better case for the shopping list as well.

— Show original

Simple-looking and functional case

— Show original

STI / SVI: works well as a friend of Edgen / DVC3. The 5.4 'barrel comes out a couple of miles, but the sights are obscured.

all good,