Reviews

Santi quality you can’t go wrong!!!

— Show original

No complaints. Works as it should and does not raise the old filling boat terribly.

— Show original

It seems to work

— Show original

Very good

Easy to install.

Works well. Although I only ordered it because the 303 Thermovalve was on back order. My thermovalve is ordered and will be sent to me when it arrives. I can’t wait for it because the connector makes your inflation valve stick out quite a bit, and in sidemount I already have a lot going on in front of me.

Works ok. However, it makes the set a bit bulky.

Great product to add to your drysuit. Easy installation and functionality. Make sure you have the SiTech comb tool to install it.

— Show original

High price but very satisfied

— Show original

There is something wrong with the E / O connectors and cables when the contact varies. Ordered for a friend and me and both the same. Restored and now another trial. So otherwise ok but may not work (= quality defects). Time will tell if the other song is ok or not.

— Show original

Functional electrical grommet for dry suit.

— Show original

Needed if you plan to stay warm.

— Show original

Works

— Show original

The bushing is easy to install between the filling valve and the suit. The package comes through your own "nut" through which the cord goes inside the suit. Original (in my case SiTech) as a filling, it is screwed onto the bushing again. The still life becomes about 20mm thicker than just boat, but is still quite functional. Inside the connector sits directly on the vest or, in my case with the Y-splitter that comes with the gloves for both vests and peoples. There is an E / O connector on the outside, so the set can be attached to most 12V battery cases.