Reviews

— Show original

Works as it should.

— Show original

Does what it should! A little difficult to attach. Then we screwed on metal plates for a better hold.

— Show original

Easy to install and functional.

Simple and works well!

— Show original

When attaching the bracket to the furnace, care must be taken to ensure that no metal reaches the aluminum drawbar of the furnace; if this happens, the metal will cut across the aluminum. The situation itself was close.

— Show original

very good goodstip top all ok

— Show original

Easy to install on almost any sled only.

— Show original

To be installed on ERApro pulka, practical.

The first feeling is good and the quality seems to be ok. I have not yet mounted the parts on the pulka.

— Show original

Works well in winter

— Show original

If you attach these to a Paris sled, then I recommend replacing the rivets with a 4mm bolt-washers-nut combination. Nothing in the middle holes or the accompanying pop rivet. The base of the bolt is left too high in the middle hole, so that the rod does not go into place.

— Show original

Good and easy to put the handle in the box

— Show original

The included pop rivets were replaced with 4mm screws and nuts. I should have kept leather straps in production. Practically the only way to fasten Fjellpulken's rod.

— Show original

Just the right product for attaching a handle.

— Show original

Functional feel and easy to install.