Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. The version with the TRIACT-LOCK locking system can be used to minimize friction on the work rope or to install redirects. The non-locking version is designed for use as a directional point on the ASCENSION handled rope clamp during short rope ascents.
Facilitates manipulations:
- Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place
- gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor
- may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping
- sheave mounted on sealed ball bearings for excellent efficiency
Available with or without locking system:
- with TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects.
- without locking system: may be used as a directional point on the ASCENSION handled rope clamp during short rope ascents
H profile of carabiner:
- ensures an improved strength-to-weight ratio
- protects markings from abrasion
Material(s): aluminum
Min. rope diameter: 7 mm
Max. rope diameter: 13 mm
Sheave diameter: 18 mm
Maximum working load: 2 x 2 = 4 kN
Efficiency: 85 %
Major axis strength: 20 kN
Minor axis strength: 8 kN
Open gate strength: 7 kN
The approximate size of the packed product or the sales package is 90 x 140 x 40 mm.
Weight 0,105 kg (with sales package 0,127 kg)
Warranty 36 month(s)
Country of origin France
Comments
Anonymousverified buyer, 22.10.2025
Overall rating
☆☆☆☆☆
— Show original
Good looking product. Also tested in use with the lifting handle. Works as it should. The center pin of the latch is suitably stiff. No rattling. Suitably sensitive bearing