Surface Marker XMS Marker

Availability
Immediately

Detailed availability

Location Store (Helsinki): Scuba diving, 26, warehouse

Reviews

Overall rating

☆☆☆☆☆ (5 reviews)

Product description

TOUGH ALL-ROUNDER for all kind of dives, secured with Bungee.

Inflated by purging a regulator or exhaling into the open end. The self-closing baffle (duck bill valve) forms an air tight seal to prevent accidental air spillage on ascent and at the surface.
Over-pressure/dump valve releases the air automatically on ascent; by pulling the dump cord you can easily deflate the buoy on the surface.
Recommended for use with spool or WDS 5.5.
Packed dimension 20 x 18cm
Weight 250g

The approximate size of the packed product or the sales package is 180 x 70 x 80 mm.

Weight
0,184 kg(The product may have a light retail packaging.)

Comments

Matti H. verified buyer, 30.10.2021

Overall rating

☆☆☆☆☆

— Show original

Really bad buoy. The bottom from which the air should get in sticks to it. In most cases, the air is really hard to get inside the buoy. I have sanded the lower part of the rubber parts with steel wool, after which the buoy is so as usable.

Jari H. verified buyer, 20.1.2021

Overall rating

☆☆☆☆☆

— Show original

This product is lousy. The lower part is glued together and no air can enter.

Jarkko K. verified buyer, 12.10.2019

Overall rating

☆☆☆☆☆

— Show original

Filling is not possible by blowing air out. Must use octo. No weight at the bottom, so keep the spool hanging. Good = does not empty itself.

Add a comment

Brand

Surface Marker

5 products

Products that have often been purchased with this product: