ERAPro 60" PRO 960 Expedition Sled

— Show original

He's been a good guy that winter camping in the woods.

— Show original

A handy bag also for games/ to play with children

— Show original

Product conforms to the description and delivered within the stipulated time. Top !

— Show original

It's not a good idea to use a rubber rope that is too thick when attaching things to the ride, at least the body started to bend a little when I used an 8mm rubber rope

— Show original

Works as expected

— Show original

Very satisfied. Light but still seems durable. Have used it for a trip. Nothing to comment on apart from the fact that the edges are sharp.

— Show original

A good blank for touring ski poles.

— Show original

Price and quality meet. It is recommended to bend the tip with a hot air blower so that the snow does not blow.

Excellent sled for DIY. This is my second sled from era pro.

— Show original

After all, Ahkio is just a blank, which each user adjusts to suit their own needs. I personally preferred the rope pull, so I didn't even consider the pull handles at this stage. My tuning was largely based on Pata Degerman's YouTube instructions, albeit somewhat modified. Pate's videos also have good information about using a hiking pole. I ordered the RAB Pulk Bag Large, One Size bag as a companion for the bag, on top of which comes a semi-ready tunnel tent and a frost mat as a bag-sized block. The ERAPro-ahkio is an affordable start to winter hikes. It's not forever and the best, but definitely worth the price. In my use, however, it lasts for years. Actually, the only detail that I can think of so far where the manufacturer could improve is the implementation of the lifting handle that comes behind the box, or at least making suitable reinforcements already at the factory. The photo does not show the elastic part of the pull rope, which I placed close to the pole, so that it goes downhill when the pull rope becomes loose, immediately under the pole to restrain it from going. In the picture, there are still two separate bags before the RAB. With the RAB bag, the center of gravity of the load can be lowered. And if the conditions require it, the whole package is still wrapped with a Tyvek cover. The only real change I made to the original stick was by drilling four holes for attaching the rear end lifting handle.