Huck Norris MegaNorris Sandwich

The sandwich has two different compound layers; soft and hard. Hard layer sits right on the rim, preventing the hardest of impacts. Softer compound smooths the small impacts, working as an additional suspension member. MegaNorris™ Sandwich is meant to be used on rough trails and enduro riding.

Installation of MegaNorris™ is as simple as any tubeless setup, just slip the insert in before installing the second bead on the rim.

The great thing about any Huck Norris insert is that you are able to ride safely with an optimal tire pressure. Not too hard or not too low. MegaNorris™ insert sits on top of the rim, supporting the tire significantly. With MegaNorris™ insert, you can for example run with 1.5bar tire pressure. Experiment with your wheel, insert and tire setup to find the best setup for you, your bike and your style of riding.

55mm wide models are for rims that have an internal width of 28-34mm (1.1-1.34 inch). 
60mm wide models are for rims that have an internal width of 33-40mm (1.34-1.57 inch).

Weight when measured at full 29″ length: 220 grams @ 60mm width / 200 grams @ 55mm width.

Impacts and forces are different for front and rear tyre. Here are some common mixes of MegaNorris™ models based on the use case.

Enduro, light

Some drops, high-speed bumps, lots of roots and big rock gardens.

Suggestion: Sandwich in the rear wheel, toast in the front wheel.

Enduro, hard

Full speed enduro riding with hard impacts.

Suggestion: Sandwich in both wheels.