Ozone Explore V2 Complete 6m²

Ozone Explore V2 Kite Only 6m²:

Built for simplicity and ease of use for all rider levels, the Explore is the master of accessibility. This single surface design opens up a world of Snowkiting opportunities, allowing you to ride confidently in an instant, adventure in new terrain and discover nature’s snowy wonders.

• Single surface dedicated Snowkite
• Entry level to expert riders
• Light weight and ultra compact
• Industry Leading Internal Re-Ride Release System

Kite Only contains:

• Kite
• Snow Kite Compressor Bag

Bar and lines are not included. Recommended bar is Ozone Bar Contact Snow V5
See also: Ozone kites recommended bars and line lenghts

The Explore is powerful for its size and delivers consistent pull throughout the wind window. It de-powers instantly without surging across the middle of the window, and generates minimal upward lift making it very user friendly to learn on. It is comfortable to fly due to the relatively slow flying speed, and the single surface design means it is exceptionally resistant to crash damage.

The Explore V2 features an increased aspect ratio and an optimised profile that greatly improve upwind performance as well as jumping capabilities. The reduced drag of the V2 also expands the top end wind range, and the Explore retains good controllability and bar feel even when fully trimmed (de-powered). These characteristics make the Explore an amazing kite for entry level and intermediate riders, providing the confidence to progress and improve your Snowkiting skills.

For advanced riders the Explore offers a whole new feeling, opening up new ways of riding and pushing the boundaries. It has versatile handling depending on your ability - tight and dynamic or slow lazy loops, both essential for navigating difficult terrain.
The new closed cells in the tips reduce tip flutter when looping the kite, resulting in less noise and a smoother feeling. Riding down slopes with the kite de-powered up high or to the side allows more concentration on riding and less worry about the kite.

For experts on backcountry missions or touring expeditions, the lightweight design means it can fly in very light wind, allowing you to work the low end efficiently without having to worry about keeping the kite in the sky. The single surface design is also ultra compact making it easy to pack multiple kites.

When it’s time to take a break or pack away you will find the Explore easy to land as it incorporates our industry-leading Internal Re-Ride Release System. This effective, easy to use, self-landing system means you can land the kite quickly whenever needed and it will remain in an open position ready to be re-launched.

The Explore V2 is available in one version with materials optimised for the conditions in which the kite will be used. Ultra Light 20D material is used on the 8m, 10 and 12m sizes. A tougher, yet still lightweight, 30D is used on the 4m and 6m strong wind kites.

The bridles are made using an optimised mixture of sheathed and unsheathed lines. Ultralight unsheathed lines are used close to the kite to reduce drag and improve performance, while the sheathed lower lines are more resistant to tangling and to snagging on hard snow.

We believe the opportunities are endless, what are you waiting for, go Explore.

FEATURES:

• Exceptional Ozone Factory construction
• Designed with OZ-CAD
• Internal Re-Ride Release System
• High Performance Ultra Light materials
• Lightweight Double Pulley Speed System
• Single Surface Design
• L.E Profile Reinforcements
• Spanwise Bridge Lines
• Low Drag Bridle Lines
• Dirt-out Wing Tips
• Tuned Bridle Geometry
• Fool Proof Line Connectors

High Performance Ultra Light Materials
High quality Ultra Light materials have been used extensively on our Kites and Paragliders since 2011. Using Ultra Light materials translates to true performance increases - the kite inflates quicker, flies faster and is more reactive even in the lightest breeze.

Internal Re-Ride Release System
Unique Internal Re-Ride Release System is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.

Another advantage of Internal Re-Ride Release System is the land and secure option. To land the kite simply pull the 5th line until you reach the Secure Loop which can be found approx 2m up from the control bar. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can be hooked onto the kite leash clip, or slipped over the bar end. This makes landing and packing your kite safe and easy even in high winds. The Brake Handle spanned between the back leader lines on the control system makes reverse launch and light wind landing easy.

Lightweight Double Pulley Speed System
Lightweight, low friction pulleys reduce wear while improving bar feel and providing smooth progressive depower.

Single Surface Design
The single surface concept generates ample lift with low airspeed, resulting in easy and forgiving handling, while still providing the power to climb steep slopes. Additionally this offers unique low end flying characteristics with instant and efficient de-power within the bar throw.

Spanwise Bridge Lines
Lines running across the underside of the kite take the place of internal straps and diagonals on double surface kites, distributing load from the bridles evenly and effectively. This avoids excessive span-wise tension being transmitted into the canopy and allows its profile and billow to be controlled more precisely.

Ozone Bar Contact Snow V4 45cm with 20m Lines:
Ozone Explore V1 4m2 and 6m2 bar and lines.

Eine saubere und simple Konstruktion mit einem einfach zu bedienenden Trimm-System. Integriert ist unsere neueste Innovation – Der CLICK-IN LOOP.

Innovativer CLICK-IN LOOP
Ein völlig neu entwickelter schiebe-Auslösemechanismus ist mit einer unglaublich intuitiven, einschrittigen Reset Funktion ausgestattet. Der Auslösegriff liegt angenehm in der Hand, das System ist schnell und einfach zu aktivieren indem man den Griff von sich weg schiebt. Ein selbstpositionierender Auslösemechanismus setzt sich selbstständig in Position, um durch einfachstes wieder „Einclicken“ des Loops zurückgesetzt zu werden. Der Click-in Loop ist AFNOR NF S52-503 zertifiziert.

"Der Click-In Loop ist ein Schritt in die richtige Richtung wenn es darum geht deine Kiteerlebnisse einfacher zu gestalten - ganz egal wo deine Abdenteuer dich hin führen werden..."
Konstruktionsinspiration

Was ist das erste was du tust, wenn du dich in ein Auto setzt? Du klickst den Anschnallgurt ein. Das "Klick" Geräusch gibt dir das Gefühl, sicher angeschnallt zu sein und du weißt instinktiv wie du es zum Abschnallen wieder auslöst.

Die Konstruktion unseres Auslösesystems, dem Click-In Loop, ist genau durch dieses Prinzip inspiriert.
So wie das Anschnallen des Sicherheitsgurts zu einer natürlichen Aktion vor dem Anlassen des Autos geworden ist, so sollten auch Kiter ihr Auslösesystem vor und nach jeder Session aktivieren und wieder zurücksetzen.

Zudem wird dieser wichtige Sicherheitscheck häufig übersehen - die Überprüfung deines Auslösesystems vor jeder Session stellt sicher, dass es sicher funktioniert. Wir entwickelten die Click-In Funktion, um eine simple und intuitive Funktion zu erhalten. So wird das Aktivieren und Zurücksetzen zu einer Handlung, die in Fleisch und Blut übergeht.

WICHTIGER HINWEIS:
Alle Fahrer sollten ihre Kiteleash mit dem Auswehsystem verbinden. Das ist die kleine Öse am Edelstahlring. Wenn das Auslösesystem aktiviert wird, weht der Kite aus und fällt zu Boden / Wasser.

Achte immer darauf, dass deine Leinen frei von Verdrehungen sind und dass die Kiteleash korrekt verbunden ist.

Reinige dein Controlsystem immer mit frischem Wasser nach jeder Session, löse es aus und resete es wieder, um stets die Funktionstüchtigkeit zu prüfen. Verstaue dein Controlsystem mit dem Click-In Loop im ausgelösten Zustand. Resete es beim nächsten Aufbau des Kites.

Ozone V4 Bar - Replacements and installs

Ozone Short Safety Leash V2:
• Stainless Steel clip
• Push-Away release
• Simple re-load
• Compact size
• Designed for hooked in riding