отзивиOzone
1321 продукти
Спорт» Кайтсърф» Хвърчила» Foil kites» Open-cell kites» Ozone Explore хвърчила»
Ozone Explore V1 Ultralight Complete 6m²
Описание на продукта
Kite/Wing size (m²)
6
Kite Only / Complete
Complete
КоментариДобавете коментар
Марка
Ozone Explore V1 Ultralight Kite Only 6m²:
The Ultra Light offers true performance increases and enhanced flying characteristics. It launches in lighter winds, flies faster, stays in the air longer in gusty conditions, and is more reactive even in the lightest breeze.
The Explore is built for simplicity and ease of use for all rider levels. It is the master of accessibility with its single surface design, it opens up a world of Snowkiting opportunities.
The Ultra Light version is the same dedicated snowkite design produced with high-quality lightweight materials to reduce the weight and volume to a minimum.
The Ultra Light version is 25% lighter and packs down to around half the size. To reduce weight and packing volume even further we have use unsheathed spliced and stitched bridle line. This line is not just lighter and thinner, it also reduces parasitic drag resulting in faster flying and tighter turns.
Kite Only includes:
The Ultra Light offers true performance increases and enhanced flying characteristics. It launches in lighter winds, flies faster, stays in the air longer in gusty conditions, and is more reactive even in the lightest breeze.
The Explore is built for simplicity and ease of use for all rider levels. It is the master of accessibility with its single surface design, it opens up a world of Snowkiting opportunities.
The Ultra Light version is the same dedicated snowkite design produced with high-quality lightweight materials to reduce the weight and volume to a minimum.
The Ultra Light version is 25% lighter and packs down to around half the size. To reduce weight and packing volume even further we have use unsheathed spliced and stitched bridle line. This line is not just lighter and thinner, it also reduces parasitic drag resulting in faster flying and tighter turns.
Kite Only includes:
- Kite
- Compressor Bag (Ozone Snow Kite Technical Mountain Bag purchased separately if needed)
- Repair Kit
Ozone Bar Contact Snow V4 45cm with 20m Lines:
Ozone Explore V1 4m2 and 6m2 bar and lines.
A clean and simple design, with an easy-to-use trim system and featuring Ozone's latest innovation - the Click-in Loop.
Innovative Click-In Loop
An all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply ‘clicking’ in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
'The Click-In Loop is a step in the right direction to making your kiting experience easier, wherever your adventures may take you...'
Design Inspiration
What’s the first thing you do when you get in a car? You click in your seatbelt, hearing that ‘click’ sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it.
The design of our new release system, the Click-In Loop, is inspired by the same principle.
In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use.
Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.
Ozone V4 Bar - Replacements and installs
Ozone Explore V1 4m2 and 6m2 bar and lines.
A clean and simple design, with an easy-to-use trim system and featuring Ozone's latest innovation - the Click-in Loop.
Innovative Click-In Loop
An all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply ‘clicking’ in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
'The Click-In Loop is a step in the right direction to making your kiting experience easier, wherever your adventures may take you...'
Design Inspiration
What’s the first thing you do when you get in a car? You click in your seatbelt, hearing that ‘click’ sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it.
The design of our new release system, the Click-In Loop, is inspired by the same principle.
In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use.
Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.
Ozone V4 Bar - Replacements and installs
Ozone Short Safety Leash V2:
• Stainless Steel clip
• Push-Away release
• Simple re-load
• Compact size
• Designed for hooked in riding
• Stainless Steel clip
• Push-Away release
• Simple re-load
• Compact size
• Designed for hooked in riding
Ozone Snow Kite Technical Mountain Bag:
- 60 litre size, enough volume to carry two kites plus extra equipment
- Large front zip makes packing and finding items quick and easy
- Large top pocket for smaller items
- Two side pockets for bottles or telescopic ski poles within easy reach
- Small pockets on the waist strap for quick access items such as a camera or phone
- Straps for your skis or snowboard, or another kite on the outside
- Fully adjustable shoulder, chest and waist straps
- The waist straps can easily be removed and the bag can be connected to the Connect harness directly saving weight and enhancing comfort
Ozone Ultralight Snow Kite Technical Mountain Bag:
The same design as the snow kite bag without model or size printing, perfect to replace any lost bags. Waistbelt can be removed and the backpack can be paired with Ozone Connect Pro, Ozone Connect Backcountry, Ozone Connect Backcountry V2, Ozone Connect Pro V2, Ozone Connect Snow Backcountry V3 Harness, Ozone Connect Snow V3 Harness..
Ultralight material.
The same design as the snow kite bag without model or size printing, perfect to replace any lost bags. Waistbelt can be removed and the backpack can be paired with Ozone Connect Pro, Ozone Connect Backcountry, Ozone Connect Backcountry V2, Ozone Connect Pro V2, Ozone Connect Snow Backcountry V3 Harness, Ozone Connect Snow V3 Harness..
Ultralight material.
- A high spec technical mountain bag with loads of features and everything you’ll need for a big day out in the mountains
- 60 litre size, enough volume to carry two kites plus extra equipment
- Large front zip makes packing and finding items quick and easy
- Large top pocket for smaller items
- Two side pockets for bottles or telescopic ski poles within easy reach
- Small pockets on the waist strap for quick access items such as a camera or phone
- Straps for your skis or snowboard, or another kite on the outside
- Fully adjustable shoulder, chest and waist straps
- The waist straps can easily be removed and the bag can be connected to the Connect harness directly saving weight and enhancing comfort
- Ultralight material
Ozone Connect Pro V2:
New version available: Ozone Connect Snow V3 Harness
The Connect Pro V2 snowkite harness is ideal for all snow or land kiters with the added support and ease of use of a Stainless Steel Spreader Bar. This comfortable waist harness includes removable leg straps making it a very universal harness on the snow or land. The second version has modifications to improve overall strength and load distribution.
Designed for comfort, support and flexibility in use, this harness is perfect to wear over or under your snow gear. Featuring high quality Aluminium adjustment buckles on the spreader bar and leg straps. The Connect Pro V2 has been designed similar to a rock climbing harness so that it will not ride up.
Stainless Steel Spreader Bar – The Spreader Bar attaches directly to both the harness and the leg straps reducing spreader bar upward tilt. Extra padding and neoprene covered for comfort.
Aluminium buckles - High quality extra strong aluminium adjustment buckles are easy to open and close. This makes fitting on the harness very easy even under snow gear. Smooth adjustment reduces wear on webbing.
Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.
Removable leg support straps - Color coded, lightweight and comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding. They can be easily removed or fitted under your snow pants without having to take them off.
Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.
Technical backpack connection - Female buckles on each side connect directly with Ozone Snow Kite Technical Mountain Bag. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.
Kite leash attachment – Easy to access front kite leash attachment.
Webbing loop attachments – Attach a grab handle or ropes for pulling sleds to the webbing loops on each side of the harness.
One size fits all – Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.
New version available: Ozone Connect Snow V3 Harness
The Connect Pro V2 snowkite harness is ideal for all snow or land kiters with the added support and ease of use of a Stainless Steel Spreader Bar. This comfortable waist harness includes removable leg straps making it a very universal harness on the snow or land. The second version has modifications to improve overall strength and load distribution.
Designed for comfort, support and flexibility in use, this harness is perfect to wear over or under your snow gear. Featuring high quality Aluminium adjustment buckles on the spreader bar and leg straps. The Connect Pro V2 has been designed similar to a rock climbing harness so that it will not ride up.
Stainless Steel Spreader Bar – The Spreader Bar attaches directly to both the harness and the leg straps reducing spreader bar upward tilt. Extra padding and neoprene covered for comfort.
Aluminium buckles - High quality extra strong aluminium adjustment buckles are easy to open and close. This makes fitting on the harness very easy even under snow gear. Smooth adjustment reduces wear on webbing.
Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.
Removable leg support straps - Color coded, lightweight and comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding. They can be easily removed or fitted under your snow pants without having to take them off.
Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.
Technical backpack connection - Female buckles on each side connect directly with Ozone Snow Kite Technical Mountain Bag. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.
Kite leash attachment – Easy to access front kite leash attachment.
Webbing loop attachments – Attach a grab handle or ropes for pulling sleds to the webbing loops on each side of the harness.
One size fits all – Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.
Ozone Connect Backcountry V2:
The Connect Backcountry V2 harness has been designed for comfort and support while remaining clean, simple and lightweight. The second version has modifications to improve overall strength and load distribution.
This comfortable waist harness with leg straps is ideal for experienced backcountry snowkiters venturing deep into mountains, or riders looking for a lightweight alternative to the classic spreader bar system. The Connect Backcountry V2 has been designed similar to a rock climbing harness so that it will not ride up.
Webbing Loop connection for Quick Release – Heavy duty webbing loop to connect the Quick Release, reducing size and weight of the harness. Three step connection – open Quick Release, feed loop through webbing, reload Quick Release.
Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.
Leg support straps - Color coded, lightweight and comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding.
Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.
Lightweight construction - Strong yet lightweight construction for backcountry touring – weighs only 700grams!
Technical backpack connection - Female buckles on each side connect directly with Ozone Snow Kite Technical Mountain Bag. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.
Kite leash attachment – Easy to access front kite leash attachment.
Webbing loop attachments – Attach a grab handle or ropes for pulling sleds to the webbing loops on each side of the harness.
One size fits all – Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.
The Connect Backcountry V2 harness has been designed for comfort and support while remaining clean, simple and lightweight. The second version has modifications to improve overall strength and load distribution.
This comfortable waist harness with leg straps is ideal for experienced backcountry snowkiters venturing deep into mountains, or riders looking for a lightweight alternative to the classic spreader bar system. The Connect Backcountry V2 has been designed similar to a rock climbing harness so that it will not ride up.
Webbing Loop connection for Quick Release – Heavy duty webbing loop to connect the Quick Release, reducing size and weight of the harness. Three step connection – open Quick Release, feed loop through webbing, reload Quick Release.
Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.
Leg support straps - Color coded, lightweight and comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding.
Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.
Lightweight construction - Strong yet lightweight construction for backcountry touring – weighs only 700grams!
Technical backpack connection - Female buckles on each side connect directly with Ozone Snow Kite Technical Mountain Bag. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.
Kite leash attachment – Easy to access front kite leash attachment.
Webbing loop attachments – Attach a grab handle or ropes for pulling sleds to the webbing loops on each side of the harness.
One size fits all – Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.
Като закупите този комплект, ще спестите 110,90 € в сравнение с закупуването на продуктите поотделно.
Kite/Wing size (m²)
6
Kite Only / Complete
Complete
КоментариДобавете коментар
Марка
Ozone Explore V1 UL - The Master of Accessibility